Category: Fiberglass Pool Cost

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Mississippi averages $60,000 for a small pool, $70,000 for a medium pool, and $80,000 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Mississippi’s long swim season makes a backyard pool one of the most-used outdoor investments a homeowner can make. Fiberglass is particularly well-suited to the state’s climate: the smooth, non-porous surface resists algae growth in Mississippi’s warm, humid environment, and the flexible shell handles the ground movement common in areas with clay-heavy or soft soils. Beyond climate, geography shapes installation costs in real ways. In the rolling terrain of Northeast Mississippi, rocky patches can require extra excavation effort. Along the Gulf Coast and in the Delta, looser soils may need reinforcement to keep the shell secure over time. Thoughtful upfront planning, starting with an honest look at your site, is the difference between a project that goes smoothly and one full of surprises.

A local independent Thursday Pools dealer can help you evaluate your yard, understand local requirements, and choose upgrades that fit your budget.

What is the Average Cost of a Fiberglass Pool Installation in Mississippi?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs. The figures below reflect current market conditions in Mississippi based on our 2026 survey of independent dealers in the state.

Based on the 2026 survey of independent Thursday Pools dealers in Mississippi, installed fiberglass pool costs average $60,000 for small pools, $70,000 for medium pools, and $80,000 for large pools.

 

AVERAGE MISSISSIPPI FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$60,000	$70,000	$80,000

 

What Does a Standard Fiberglass Pool Installation in Mississippi Include?

Most Mississippi dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Mississippi pool installation.

 

What Do Popular Fiberglass Pool Models Cost Installed in Mississippi?

ASPEN (12’ x 25’)

Aspen is a compact, well-designed fiberglass pool that delivers a lot for smaller backyards across Mississippi. At 25 feet in length, it fits comfortably in suburban lots in Jackson, Gulfport, and Tupelo, and still packs in a built-in tanning ledge, wide entry steps, an open swim lane, and generous bench seating. For homeowners who want a capable pool without the footprint of a larger model, Aspen is a strong starting point.

Based on 2026 feedback from Thursday Pools dealers throughout Mississippi, the average installed cost for a small fiberglass pool like Aspen or other designs less than 26 feet long and 400 square feet is $60,000.

 

SUN DAY (15’ x 30’)

Sun Day brings relaxed, freeform elegance to mid-size backyards across Mississippi. Its organic shape creates a resort-style atmosphere that fits naturally into everything from Oxford’s tree-lined neighborhoods to Biloxi’s coastal properties. A dedicated sun shelf, wraparound benches, and a wide entry landing pad give it purposeful features that work equally well for quiet afternoons and larger gatherings.

According to 2026 survey responses from independent Thursday Pools dealers throughout Mississippi, the average installed cost for a medium-sized fiberglass pool like the Sun Day is $70,000.

 

MACK DADDY (16’ x 36’)

Mack Daddy is built for homeowners who want the full package. Thursday Pools’ first design to feature a fully integrated spa with a spillway, Mack Daddy also includes a spacious tanning ledge, a conversation area with wraparound benches and wide entry steps, and an open swim lane at uniform flat-bottom depth.

Larger Mississippi properties, whether in the spacious suburbs of Ridgeland or across the state’s more rural terrain, have room for a pool of this scale. The average cost for a standard installation of a large fiberglass pool like Mack Daddy in Mississippi is $80,000.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Mississippi?

Mississippi’s varied landscape means site conditions can differ and impact a fiberglass pool project’s cost. Before breaking ground, a professional installer will assess your site for conditions that may require extra preparation.

Soil Type

Mississippi’s geology creates distinct challenges depending on where you are in the state. In the northeastern hills around Oxford and Corinth, rocky patches can require additional excavation labor and specialized equipment. Central Mississippi, including the Jackson and Madison areas, often has heavy clay soil that retains water and may require extra handling to ensure proper drainage and stable installation. Along the Gulf Coast near Biloxi and Gulfport, softer sandy soils can need reinforcement to keep the pool shell from shifting over time. A pre-installation site assessment identifies what your specific soil requires before the project begins.

Slope and Grade

Properties near the Natchez Bluffs, in the Ozark foothills, or anywhere with significant elevation change may need grading, retaining walls, or other leveling work before excavation can proceed. A relatively flat, level yard keeps installation more straightforward and predictable.

Backyard Access

Wide, open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or access restrictions common in older urban neighborhoods or historic areas may need specialty equipment, additional labor, or crane service to move the one-piece pool shell into position.

 

AVERAGE ADDITIONAL YARD-RELATED EXPENSES IN MISSISSIPPI
Excavating Sandy Soil	$400
Excavating Clay Soil	$400
Excavating Rocky Soil	$400
Above-Average Slope Requiring Extra Grading	$2,000
Limited Yard Access	$4,000

Based on Thursday Pools’ 2026 independent dealer survey, site-condition upcharges range from about $400 for sandy, clay, or rocky soil to $4,000 for limited yard access.

 

What Are Mississippi’s Swimming Pool Fence Requirements?

Homeowners building a private residential pool in Mississippi are subject to the barrier and fencing requirements set by their local municipality or county. Common baseline requirements include:

• The barrier must be at least 48 inches tall and not more than 2 inches off the ground, measured on the exterior side of the fence or wall facing away from the pool.
• Gates must be self-closing and self-latching while opening outward away from the pool.
• The self-latching mechanism must be on the pool side of the gate if installed less than 54 inches off the ground.

Local jurisdictions may adopt stricter requirements. For example, the City of Olive Branch requires detailed site plan submissions and a temporary code-compliant barrier during the installation period itself. Always verify current requirements with your local municipality, county building department, and HOA before installation.

For a 300-linear-foot basic pool fence, Mississippi dealers estimate an average cost of $13,500. Final pricing varies by material, height, gate requirements, terrain, and local code compliance.

 

How Much Do Fiberglass Pool Upgrades Cost in Mississippi?

Optional features can expand what your pool does and extend your swimming season throughout Mississippi’s long warm-weather months. The right upgrades enhance comfort, convenience, and safety while maximizing your investment. The averages below come from Thursday Pools’ 2026 dealer survey in Mississippi.

Water Quality and System Controls

Pool Heater

• Average Cost in Mississippi: $6,500
• Extend your swim season by keeping the water at a comfortable temperature during cooler months, maximizing an already-long swim season in Mississippi’s mild climate.

UV Filter System

• Average Cost in Mississippi: $2,800
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently — an especially useful upgrade in Mississippi’s warm, humid environment.

Pool Automation and Smart Control System

• Average Cost in Mississippi: $5,500
• Manage temperature, lighting, and filtration from a smartphone or tablet.

Patio and Hardscape

 

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Mississippi: $12,000
• A durable, low-maintenance decking option that performs well in Mississippi’s warm, humid climate.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Mississippi: $18,000
• Available in a range of materials, from concrete pavers to natural stone, with a more finished aesthetic than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Mississippi: $13,500
• Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Mississippi: $3,500
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover

• Average Cost in Mississippi: $23,000
• One-touch operation to protect the pool, retain heat, and reduce evaporation.

 

Water Features

Deck Jets

• Average Cost in Mississippi: $600 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Mississippi: $600 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Mississippi: $5,500
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Mississippi: $1,200
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Mississippi: $1,500 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Mississippi: $7,000
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Recreation

Simple Pool Slide*

• Average Cost in Mississippi: $5,500
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Mississippi: $12,100
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Mississippi: $4,100
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Mississippi: $500
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Mississippi: $15,000
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

 

Frequently Asked Questions About Mississippi Fiberglass Pool Costs

How much does a fiberglass pool cost in Mississippi?

A fiberglass pool in Mississippi costs an average of $60,000 for a small pool, $70,000 for a medium pool, and $80,000 for a large pool, based on Thursday Pools’ 2026 survey of the state’s independent dealers.

What does a standard fiberglass pool installation in Mississippi include?

A standard fiberglass pool installation in Mississippi typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Mississippi?

Rocky soil in Mississippi’s northeastern hills, clay-heavy soil throughout central Mississippi, and sandy soil along the Gulf Coast can each require different levels of site preparation. The good news is that Mississippi’s relatively flat terrain outside its hilly northeastern and Natchez regions keeps slope-related costs modest for most of the state. Limited backyard access, such as narrow gates or tight side yards in older urban neighborhoods, can require crane service or specialty equipment. Based on the 2026 Mississippi dealer survey, site-condition upcharges range from about $400 for soil-related excavation challenges to $4,000 for navigating limited yard access.

What are Mississippi’s pool fence requirements?

Residential Mississippi pools are subject to the barrier and fencing requirements set by the local municipality or county. Most barriers must be at least 48 inches tall and no more than 2 inches off the ground, with self-closing and self-latching gates that open outward away from the pool. Local jurisdictions may adopt stricter requirements. Always verify current requirements with your local municipality, county building department, and HOA before installation.

The 2026 Thursday Pools survey shows an average cost of $13,500 for a 300-linear-foot basic fence in Mississippi, with final costs varying by material, height, gate requirements, terrain, and local code compliance.

How much do common pool upgrades add to the cost in Mississippi?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $6,500.
• An automatic pool cover averages $23,000.
• A paver patio of approximately 1,200 square feet averages $18,000.
• An add-on spa averages $15,000.
• Smaller additions like deck jets ($600 per jet), bubblers ($600 per bubbler), and LED lights ($1,500 per light) add cost in more manageable increments.

How do I get an accurate cost estimate for a fiberglass pool in Mississippi?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get Your Personalized Mississippi Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Mississippi, and the design details and upgrades you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote, whether you’re in Jackson, Gulfport, Biloxi, Tupelo, Hattiesburg, Oxford, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Pennsylvania averages $76,667 for a small pool, $92,778 for a medium pool, and $108,333 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Pennsylvania’s geography creates variation in pool installation costs from one part of the state to another. In the Pittsburgh and Philadelphia metro areas, local permit requirements, tighter lots, and access constraints can add to the overall project cost. Rocky Appalachian terrain in Western Pennsylvania and the Pocono region can require specialized excavation equipment and additional labor. Clay-heavy soils, common in Central Pennsylvania around Harrisburg and the Lehigh Valley, can create drainage challenges that require careful site preparation. Properties near the Susquehanna or Delaware rivers may have looser, sandy soils that need reinforcement to support the pool shell over time.

Optional upgrades like pool heaters, automatic covers, and custom patio surfaces add to your total cost but also extend your swimming season and enhance the overall value you get from your pool. A local independent Thursday Pools dealer can help you decide which additions fit your property and your budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Pennsylvania?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs. The figures below reflect current market conditions in Pennsylvania based on our 2026 survey of independent Thursday Pools dealers across the state.

Based on the 2026 survey of independent Thursday Pools dealers in Pennsylvania, installed fiberglass pool costs average $76,667 for small pools, $92,778 for medium pools, and $108,333 for large pools.

 

AVERAGE PENNSYLVANIA FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$76,667	$92,778	$108,333

 

What Does a Standard Fiberglass Pool Installation in Pennsylvania Include?

Most Pennsylvania dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Pennsylvania pool installation.

 

What Do Popular Fiberglass Pool Models Cost Installed in Pennsylvania?

ASPEN (12’ x 25’)

Aspen is one of Thursday Pools’ best-selling fiberglass pool designs, and its most compact 12′ x 25′ footprint makes it a standout choice for Pennsylvania homeowners with smaller or tighter backyards. A built-in tanning ledge provides a perch for lounging, while the open swim space offers room to cool off and play. Aspen comes in five sizes, so there’s a version that fits virtually any yard.

Based on 2026 feedback from Thursday Pools dealers across Pennsylvania, the average installed cost for a small fiberglass pool like Aspen or other designs less than 26 feet long and 400 square feet is $76,667.

 

TITUS (14’ x 33’)

Titus delivers smooth curves and an inviting layout that fits naturally into Pennsylvania backyards, from the tree-lined neighborhoods of Harrisburg to more open properties in the York or State College areas. A full-length conversation bench at one end and built-in seating near the entry steps at the other encourage gathering and relaxation, while the center swim lane provides plenty of space for laps, games, or a peaceful float.

According to 2026 survey responses from independent Thursday Pools dealers in Pennsylvania, the average installed cost for a medium-sized fiberglass pool like Titus is $92,778.

 

WELLSPRING (16’ x 40’)

Wellspring brings resort-style elegance to Pennsylvania properties with the space to accommodate a full-featured design. This freeform pool features a spacious sun shelf, wraparound bench seating, wide entry steps, and a deep-end conversation area that invites guests to relax and stay awhile. Its organic shape blends naturally with surrounding landscaping, making it a beautiful fit for scenic Pocono retreats and expansive suburban or rural properties throughout the state.

Due to its size, at 40 feet long and more than 600 square feet, larger pools like Wellspring typically come at a higher installed cost. In Pennsylvania, the 2026 average installed cost for a large fiberglass pool is $108,333.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Pennsylvania?

Pennsylvania’s varied terrain and soil conditions can affect installation costs. Before breaking ground, a professional installer will assess your site for conditions that may require extra preparation.

Soil Type

Pennsylvania’s geology varies across the state. Rocky conditions in the Appalachian highlands of Western Pennsylvania and the Pocono region may require specialized excavation equipment and considerably more labor. Clay-heavy soil, common across Central Pennsylvania and parts of the Lehigh Valley, creates drainage and stability challenges that require careful site preparation. Sandy soils near river valleys along the Susquehanna and Delaware rivers may need reinforcement to properly support the pool shell over time. A pre-installation site assessment can identify what your specific soil requires before the project begins.

Slope and Grade

Many Pennsylvania properties feature significant grade changes, particularly in the Lehigh Valley, along the Allegheny Plateau, and in hillside communities near Reading, Altoona, or Pittsburgh. These slopes often require grading, retaining walls, or other leveling work before excavation and installation can proceed. A relatively flat, level yard typically keeps installation more straightforward and predictable.

Backyard Access

Wide-open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, overhead utility lines, or other access constraints may need specialty equipment, additional labor, or crane service to move the pool shell into position. Older, densely developed neighborhoods in cities like Harrisburg, Scranton, or Philadelphia’s Main Line suburbs are more likely to present access challenges that affect both timeline and cost.

 

AVERAGE ADDITIONAL YARD-RELATED EXPENSES IN PENNSYLVANIA
Excavating Sandy Soil	$1,062
Excavating Clay-Heavy Soil	$1,225
Excavating Rocky Soil	$3,050
Above-Average Slope Requiring Extra Grading	$4,312
Limited Yard Access	$3,350

 

Based on Thursday Pools’ 2026 independent dealer survey, site-condition upcharges in Pennsylvania range from about $1,062 for working with sandy soil to $4,312 for grading above-average slopes.

 

What Are Pennsylvania’s Swimming Pool Fence Requirements?

Pennsylvania’s residential pool barrier requirements are governed statewide through the Pennsylvania Uniform Construction Code (UCC), administered by the Pennsylvania Department of Labor and Industry. The UCC incorporates the International Swimming Pool and Spa Code (ISPSC), which sets the minimum barrier standards for residential pools throughout the state.

Common requirements under Pennsylvania’s UCC and the IRC Appendix G include:

• The barrier must completely enclose the pool area.
• The barrier must be at least 48 inches tall, measured from the outside ground level.
• The vertical clearance between the ground and the bottom of the barrier must not exceed 2 inches.
• Openings in or under the barrier must not allow passage of a 4-inch-diameter sphere.
• The barrier must not contain footholds or handholds that could be used for climbing.
• Gates must be self-closing and self-latching, and must swing outward away from the pool.
• Where the gate latch is located less than 54 inches above the ground, it must be positioned on the pool-facing side of the gate.

HOA guidelines may add further restrictions beyond the statewide baseline. Always verify the specific permit and barrier requirements with your local building department before starting your project. A knowledgeable local independent Thursday Pools dealer can also help navigate your area’s permit process.

For a 300-linear-foot basic pool fence, Pennsylvania dealers estimate an average cost of $14,588. Final pricing varies by material, height, gate requirements, terrain, and local code compliance.

 

How Much Do Fiberglass Pool Upgrades Cost in Pennsylvania?

Optional features can expand what your pool does and how long you use it each season. The right upgrades enhance comfort, convenience, and safety while maximizing your investment across Pennsylvania’s warm-weather months. The averages below come from Thursday Pools’ 2026 dealer survey of independent installers across Pennsylvania.

Water Quality and System Controls

Pool Heater

• Average Cost in Pennsylvania: $4,412
• Extend your swim season by maintaining comfortable water temperatures into Pennsylvania’s cooler spring mornings and fall evenings.

UV Filter System

• Average Cost in Pennsylvania: $1,475
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System

• Average Cost in Pennsylvania: $4,150
• Manage temperature, lighting, and filtration from a smartphone or tablet, whether you’re poolside or away for the weekend.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Pennsylvania: $16,888
• A durable, low-maintenance decking option that holds up well through Pennsylvania’s seasonal temperature swings and freeze-thaw cycles.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Pennsylvania: $17,925
• Available in a range of materials, from concrete pavers to premium natural stone, with a more polished aesthetic than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Pennsylvania: $14,588
• Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Pennsylvania: $4,838
• A manual option for securing the pool and keeping debris out between uses — especially helpful through Pennsylvania’s longer off-season.

Automatic Pool Cover

• Average Cost in Pennsylvania: $19,725
• One-touch operation to protect the pool, retain heat, and reduce evaporation.

 

Water Features

Deck Jets

• Average Cost in Pennsylvania: $962 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Pennsylvania: $1,550 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Pennsylvania: $3,562
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Pennsylvania: $1,350
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Pennsylvania: $1,501 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Pennsylvania: $4,388
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Recreation

Simple Pool Slide*

• Average Cost in Pennsylvania: $4,975
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Pennsylvania: $7,800
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Pennsylvania: $2,575
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Pennsylvania: $8,712
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Pennsylvania: $14,562
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

 

Frequently Asked Questions About Pennsylvania Fiberglass Pool Costs

How much does a fiberglass pool cost in Pennsylvania?

A fiberglass pool in Pennsylvania costs an average of $76,667 for a small pool, $92,778 for a medium pool, and $108,333 for a large pool, based on Thursday Pools’ 2026 survey of independent Pennsylvania dealers.

What does a standard fiberglass pool installation in Pennsylvania include?

Our 2026 Pennsylvania dealer survey shows that a standard fiberglass pool installation typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local Pennsylvania municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Pennsylvania?

Rocky terrain in Western Pennsylvania and the Pocono region requires heavier excavation equipment and more labor. Clay-heavy soil across Central Pennsylvania can create drainage and stability concerns during installation. Sloped yards, common throughout the state’s hilly regions, often need grading work to create a level base. Limited backyard access, such as narrow side yards or tight lot lines in older urban neighborhoods, can require crane service or specialty equipment. Based on the 2026 survey of Thursday Pools independent dealers in Pennsylvania, the most significant site-condition upcharges include grading for above-average slopes at $4,312 and navigating limited yard access at $3,350.

What are Pennsylvania’s pool fence requirements?

Pennsylvania’s residential pool barrier requirements are set statewide through the Uniform Construction Code (UCC), which incorporates the International Swimming Pool and Spa Code (ISPSC). The IRC requires that any pool deeper than 24 inches be completely enclosed by a barrier at least 48 inches tall, with a maximum 2-inch gap at the ground, openings no larger than 4 inches in diameter, and self-closing, self-latching gates that swing outward away from the pool. Gate latches positioned less than 54 inches above the ground must be located on the pool-facing side of the gate. The UCC is enforced locally through municipal building departments across the state. Always verify current requirements with your local building department before installation.

The 2026 Pennsylvania Thursday Pools dealer survey average for a 300-linear-foot basic fence is $14,588, with final costs varying by material, height, gate requirements, terrain, and local code compliance.

How much do common pool upgrades add to the cost in Pennsylvania?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $4,412.
• An automatic pool cover averages $19,725.
• A poured concrete patio of approximately 1,200 square feet averages $16,888.
• An add-on spa averages $14,562.
• Smaller additions like deck jets ($962 per jet), bubblers ($1,550 per bubbler), and LED lights ($1,501 per light) add cost in more modest increments.

How do I get an accurate cost estimate for a fiberglass pool in Pennsylvania?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get a Personalized Pennsylvania Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Pennsylvania, and the design details and upgrades you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote, whether you’re in Pittsburgh, Philadelphia, Harrisburg, Allentown, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Missouri averages $75,500 for a small pool, $94,000 for a medium pool, and $111,000 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Missouri’s geography creates real variation in pool installation costs from one part of the state to another. In metropolitan areas like St. Louis and Kansas City, local permit requirements and zoning regulations can add complexity to project costs. The rocky terrain of Southern Missouri’s Ozark region and the clay-heavy soils of Central Missouri around Columbia and Jefferson City can require specialized excavation work. In contrast, flatter areas of Southeastern and Northern Missouri may offer more straightforward installation conditions, though soil stabilization can still be a factor. Urban areas often present limited yard access challenges, while rural and suburban properties typically offer more room and easier access.

Optional features such as pool heaters, automatic covers, and upgraded decking materials add to your total investment but also extend your swimming season and enhance the overall value you get from Missouri’s warm summers. A local independent Thursday Pools dealer can help you decide which additions fit your property and your budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Missouri?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs. The figures below come from the responses of 10 independent Thursday Pools dealers operating throughout Missouri.

Based on the 2026 survey of independent Thursday Pools dealers in Missouri, installed fiberglass pool costs average $75,500 for small pools, $94,000 for medium pools, and $111,000 for large pools.

 

AVERAGE MISSOURI FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$75,500	$94,000	$111,000

 

What Does a Standard Fiberglass Pool Installation in Missouri Include?

Most Missouri dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Missouri pool installation.

 

What Do Popular Fiberglass Pool Models Cost Installed in Missouri?

GOLIATH (12’ x 25’)

Goliath’s smallest size is a versatile choice for Missouri homeowners looking for a compact yet feature-rich fiberglass pool that fits well in smaller suburban and urban backyards. At 25 feet in length, this model is a natural fit for neighborhoods across Kansas City, St. Louis, and Springfield. The pool features integrated entry steps, built-in bench seating, and a clear open swim lane. It’s a refreshing retreat from Missouri’s summer heat without demanding an oversized yard.

Based on 2026 feedback from Thursday Pools dealers across Missouri, the average installed cost for a small fiberglass pool like Goliath or other designs less than 26 feet long and 400 square feet is $75,500.

LIL BOB (13.5’ x 27.5’)

Lil Bob delivers a clean rectangular layout with a uniform flat-bottom depth that makes the full pool usable from end to end. Wide entry steps, bench seating along opposite sides, and a practical footprint make it well-suited for mid-size Missouri backyards, from suburban lots in St. Charles and Lee’s Summit to rural properties in the Ozarks.

According to 2026 survey responses from independent Thursday Pools dealers in Missouri, the average installed cost for a medium-sized fiberglass pool like the Lil Bob is $94,000.

 

WELLSPRING (16’ x 40’)

Wellspring brings resort-style elegance to Missouri properties with the space to accommodate a full-featured design. This freeform pool features a spacious sun shelf, wraparound bench seating, wide entry steps, and a deep-end conversation area for both active swimming and leisurely afternoons. Wellspring is a good fit for larger suburban or rural Missouri properties, from the rolling hills of Central Missouri to the scenic Ozarks.

Due to its size at 40 feet long and more than 600 square feet, larger pools like Wellspring typically come at a higher installed cost. In Missouri, the 2026 average installed cost for a large fiberglass pool is $111,000.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Missouri?

Missouri’s varied terrain and soil conditions can affect pool installation costs, sometimes more than homeowners expect. Before breaking ground, a professional installer will assess your site for conditions that may require extra preparation.

Soil Type

Missouri’s diverse geology creates distinct soil challenges across the state. Rocky conditions in the Ozark highlands often require specialized excavation equipment and additional labor. Clay-heavy soils common across Central and Western Missouri can create drainage and stability concerns during installation. Sandy soils found in certain Southeastern Missouri River areas may need additional stabilization to properly support the pool shell. A pre-installation site assessment can identify what your specific soil requires before the project begins.

Slope and Grade

Many Missouri properties feature slopes that require grading, retaining walls, or other leveling work before excavation and installation can proceed. Properties in the Ozarks and the hillier regions around the Missouri River valley are more likely to encounter this. A relatively flat, level yard typically keeps installation more straightforward and predictable.

Backyard Access

Wide-open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or other access constraints may need specialty equipment, additional labor, or crane rental service to move the pool shell into position. In established neighborhoods, particularly in urban areas like Kansas City and St. Louis, access limitations can affect both the timeline and the cost of installation.

 

AVERAGE ADDITIONAL YARD-RELATED EXPENSES IN MISSOURI
Excavating Sandy Soil	$1,822
Excavating Clay-Heavy Soil	$1,511
Excavating Rocky Soil	$2,889
Above-Average Slope Requiring Extra Grading	$2,600
Limited Yard Access	$4,133

 

Based on Thursday Pools’ 2026 independent dealer survey, site-condition upcharges in Missouri range from about $1,511 for excavating clay-heavy soil to $4,133 for navigating limited yard access.

 

What Are Missouri’s Swimming Pool Fence Requirements?

Swimming pool fence and barrier requirements in Missouri are generally handled through local city and county building codes, and many Missouri jurisdictions follow the International Residential Code (IRC) or similar residential pool barrier standards.

Common requirements across Missouri municipalities include:

• The barrier must be at least 48 inches tall, measured from the outside ground level.
• The gap between the ground and the bottom of the barrier must not exceed 2 inches.
• Gates must be self-closing and self-latching, and must swing outward away from the pool.
• Gate latches positioned less than 54 inches above the ground must be located on the pool-facing side of the gate.
• The barrier cannot have footholds or handholds that could be used for climbing.

Springfield’s official pool barrier regulations, for example, require barriers at least 48 inches above finished ground level, with self-closing and self-latching pedestrian access gates that accommodate a locking device. Kansas City and St. Louis area jurisdictions follow similar 48-inch minimum standards with self-closing, self-latching gates.

Always check swimming pool barrier and safety regulations for your local county or municipality before installation. Local rules can vary, and some Missouri jurisdictions may adopt stricter requirements than the baseline model code.

For a 300-linear-foot basic pool fence, Missouri dealers estimate an average cost of $10,750. Final pricing varies by material, height, gate requirements, terrain, and local code compliance.

 

How Much Do Fiberglass Pool Upgrades Cost in Missouri?

Optional features can expand what your pool does and how long you use it each season. The right upgrades enhance comfort, convenience, and safety while maximizing your investment. The averages below come from Thursday Pools’ 2026 dealer survey of independent dealers and installers across Missouri.

Water Quality and System Controls

Pool Heater

• Average Cost in Missouri: $6,125
• Extend your swim season by keeping the water at a comfortable temperature into cooler spring and fall months, maximizing your investment in Missouri’s transitional seasons.

UV Filter System

• Average Cost in Missouri: $2,688
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System

• Average Cost in Missouri: $5,288
• Manage temperature, lighting, and filtration from a smartphone or tablet.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Missouri: $8,962
• A durable, low-maintenance decking option that handles Missouri’s temperature swings and seasonal freeze-thaw cycles.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Missouri: $10,300
• Available in a range of materials, from concrete pavers to natural stone, with a more finished aesthetic than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Missouri: $10,750
• Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Missouri: $4,200
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover

• Average Cost in Missouri: $15,288
• One-touch operation to protect the pool, retain heat, and reduce evaporation. Many Missouri homeowners prioritize this upgrade for safety and convenience.

 

Water Features

Deck Jets

• Average Cost in Missouri: $950 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Missouri: $1,512 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Missouri: $4,325
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Missouri: $2,925
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Missouri: $988 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Missouri: $4,012
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Missouri: $8,000
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Missouri: $14,775
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

 

Recreation

Simple Pool Slide*

• Average Cost in Missouri: $4,812
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Missouri: $8,475
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Missouri: $3,288
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

Frequently Asked Questions About Missouri Fiberglass Pool Costs

How much does a fiberglass pool cost in Missouri?

A fiberglass pool in Missouri costs an average of $75,500 for a small pool, $94,000 for a medium pool, and $111,000 for a large pool, based on Thursday Pools’ 2026 dealer survey of 10 Missouri installers.

What does a standard fiberglass pool installation in Missouri include?

Our 2026 Missouri dealer survey shows that a standard fiberglass pool installation typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local Missouri municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Missouri?

Rocky soil in the Ozarks requires heavier excavation equipment and more labor. Clay-heavy soil in Central Missouri can create drainage and stability concerns. Sloped yards often need grading work to create a level base. Limited backyard access, such as narrow gates or tight side yards in urban neighborhoods, can require crane service or specialty equipment. Based on the 2026 Missouri dealer survey, site-condition upcharges range from about $1,511 for excavating clay-heavy soil to $4,133 for navigating limited yard access.

What are Missouri’s pool fence requirements?

Missouri pool fence and barrier requirements are handled through local city and county building codes, and many Missouri jurisdictions follow the International Residential Code (IRC) or similar standards. Common local requirements include barriers at least 48 inches tall, limited ground clearance, self-closing and self-latching gates that swing away from the pool, child-resistant latch placement, and designs that limit footholds or handholds. Local rules can vary, so homeowners should always verify requirements with their county or municipality before installation.

The 2026 Missouri Thursday Pools dealer survey average for a 300-linear-foot basic fence is $10,750, with final costs varying by material, height, gate requirements, terrain, and local code compliance.

How much do common pool upgrades add to the cost in Missouri?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $6,125.
• An automatic pool cover averages $15,288.
• A paver patio of approximately 1,200 square feet averages $10,300.
• An add-on spa averages $14,775.
• Smaller additions like deck jets ($950 per jet), bubblers ($1,512 per bubbler), and LED lights ($988 per light) add cost in more modest increments.

How do I get an accurate cost estimate for a fiberglass pool in Missouri?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get Your Personalized Missouri Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Missouri, and the design details and upgrades you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote, whether you’re in Kansas City, St. Louis, Springfield, Columbia, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Illinois averages $73,333 for a small pool, $88,611 for a medium pool, and $102,500 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Illinois’ diverse geography creates real variation in pool installation costs across the state. In metropolitan areas like Chicago and its suburbs, local permit requirements, zoning regulations, and dense neighborhoods can add complexity to project costs. Varied ground conditions throughout Illinois, from clay-heavy soils in many regions to rocky conditions in certain areas, can affect excavation requirements and installation timelines. Urban areas often present limited yard access challenges, while rural properties typically offer more straightforward installation conditions.

Optional features such as pool heaters, automatic covers, and upgraded decking materials add to your total investment but also extend your swimming season and enhance the overall value you get from Illinois’ warm summers. A local independent Thursday Pools dealer can help you decide which additions fit your property and your budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Illinois?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs. The figures below reflect current market conditions in Illinois based on our 2026 survey of 19 independent dealers.

Based on the 2026 survey of independent Thursday Pools dealers in Illinois, installed fiberglass pool costs average $73,333 for small pools, $88,611 for medium pools, and $102,500 for large pools.

AVERAGE ILLINOIS FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$73,333	$88,611	$102,500

 

What Does a Standard Fiberglass Pool Installation in Illinois Include?

Most Illinois dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Illinois pool installation.

What Do Popular Fiberglass Pool Models Cost Installed in Illinois?

ASPEN (12′ x 25′)

Aspen is a versatile choice for Illinois homeowners looking for a compact yet elegant fiberglass pool that fits well in smaller suburban backyards. At 25 feet in length, this rectangular model is perfect for urban areas in Chicago, Springfield, or Rockford. The pool features built-in bench seating and offers a refreshing retreat from Illinois’ summer heat without the maintenance demands of a full-sized pool.

Based on 2026 feedback from Thursday Pools dealers across Illinois, the average installed cost for a small fiberglass pool like Aspen or other designs less than 26 feet long and 400 square feet is $73,333.

 

SUN DAY (15′ x 30′)

Sun Day is a spacious fiberglass pool that accommodates active families throughout Illinois. Its graceful freeform shape provides generous swimming space, perfect for exercise or play during the state’s warm summer months. The pool features a large landing pad with built-in entry stairs, wraparound benches, and a separate swim-out sun shelf for relaxation and socializing.

According to 2026 survey responses from independent Thursday Pools dealers in Illinois, the average installed cost for a medium-sized fiberglass pool like the Sun Day is $88,611.

 

MACK DADDY (16′ x 36′)

Mack Daddy brings luxury and functionality to Illinois properties seeking elegance and comprehensive aquatic features. This premium design is Thursday Pools’ first to feature a fully integrated spa with spillway, in addition to a spacious tanning ledge, conversation area with wraparound benches, wide entry steps, and an open swim lane with uniform flat-bottom depth.

The Mack Daddy and similar large models are well-suited for suburban or rural Illinois properties with room for an expansive yet stylish pool complex. The average cost for a standard installation of a large fiberglass pool like Mack Daddy in Illinois is $102,500.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Illinois?

Illinois’ varied terrain and soil conditions can affect installation costs significantly, sometimes more than homeowners expect. Before breaking ground, a professional installer will assess your site for conditions that may require extra preparation.

Soil Type

Illinois’ diverse geology creates distinct soil challenges across the state. Many areas throughout Illinois have clay-heavy soils that can create drainage concerns and require special handling during installation. Rocky soil conditions, while less common, appear in certain areas and often require specialized excavation equipment and additional labor costs. Sandy soils are found in specific regions and may need additional stabilization measures. A pre-installation site assessment can identify what your specific soil requires before the project begins.

Slope and Grade

Many Illinois properties have slopes that require grading, retaining walls, or other leveling work before excavation and installation can proceed. A relatively flat, level yard typically keeps installation more straightforward and predictable.

Backyard Access

Wide, open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or other access constraints may need specialty equipment, additional labor, or crane service to move the pool shell into position. In established neighborhoods, particularly in urban areas like Chicago, Peoria, or suburban developments, access limitations can affect both the timeline and the cost of installation.

 

AVERAGE ADDITIONAL YARD-RELATED EXPENSES IN ILLINOIS
Excavating Sandy Soil	$3,953
Excavating Clay-Heavy Soil	$1,947
Excavating Rocky Soil	$5,035
Above-Average Slope Requiring Extra Grading	$4,347
Limited Yard Access	$5,994

 

Based on Thursday Pools’ 2026 independent dealer survey, site-condition upcharges range from about $1,947 for clay-heavy soil to $5,994 for limited yard access.

 

What Are Illinois’ Swimming Pool Fence Requirements?

Pool barrier requirements in Illinois are set by local municipalities and counties. Many Illinois jurisdictions regulate pool enclosures through local building ordinances that vary by location. Common baseline requirements in Illinois municipalities include:

• Barriers tall enough to prevent unauthorized access
• Self-closing and self-latching gates
• No openings a child could pass through

Always check swimming pool barrier and safety regulations for your specific local county or municipality before installation. Local building departments can provide current requirements and permit information for your area. Chicago requires barriers at least 5 feet high with self-closing, self-latching gates for pools deeper than 4 feet.

For a 300-linear-foot basic pool fence, Illinois dealers estimate an average cost of $10,913. Final pricing varies by material, height, gate requirements, terrain, and local code compliance.

 

How Much Do Fiberglass Pool Upgrades Cost in Illinois?

Optional features can expand what your pool does and extend your swimming season throughout Illinois’ climate. The right upgrades enhance comfort, convenience, and safety while maximizing your investment. The averages below come from Thursday Pools’ 2026 dealer survey in Illinois.

Water Quality and System Controls

Pool Heater

• Average Cost in Illinois: $6,047
• Extend your swim season by keeping the water at a comfortable temperature during cooler months, maximizing your investment in Illinois’ climate.

UV Filter System

• Average Cost in Illinois: $3,473
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System

• Average Cost in Illinois: $5,513
• Manage temperature, lighting, and filtration from a smartphone or tablet.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Illinois: $12,467
• A durable, low-maintenance decking option that handles Illinois’ freeze-thaw cycles and seasonal weather changes.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Illinois: $14,860
• Available in a range of materials, from concrete pavers to natural stone, with a more finished aesthetic than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Illinois: $10,913
• Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Illinois: $6,487
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover

• Average Cost in Illinois: $15,760
• One-touch operation to protect the pool, retain heat, and reduce evaporation. Many Illinois homeowners prioritize this upgrade for safety and convenience.

 

Water Features

Deck Jets

• Average Cost in Illinois: $2,667 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Illinois: $4,680 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Illinois: $6,447
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Illinois: $4,860
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Illinois: $2,549 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Illinois: $4,960
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Illinois: $6,040
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Illinois: $22,520
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

 

Recreation

Simple Pool Slide*

• Average Cost in Illinois: $6,433
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Illinois: $10,447
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Illinois: $4,627
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Frequently Asked Questions About Illinois Fiberglass Pool Costs

How much does a fiberglass pool cost in Illinois?

A fiberglass pool in Illinois costs an average of $73,333 for a small pool, $88,611 for a medium pool, and $102,500 for a large pool, based on Thursday Pools’ 2026 survey of the state’s independent dealers.

What does a standard fiberglass pool installation in Illinois include?

A standard fiberglass pool installation in Illinois typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local Illinois municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Illinois?

Clay-heavy soil throughout many Illinois regions can create drainage and stability concerns during installation. Rocky soil in certain geological areas requires specialized excavation equipment and additional labor. Sandy soils in specific regions may need additional stabilization measures. Sloped yards often need grading work to create a level base. Limited backyard access, such as narrow gates or tight side yards in urban neighborhoods, can require crane service or specialty equipment. Based on the 2026 Illinois dealer survey, site-condition upcharges range from about $1,947 for clay-heavy soil to $5,994 for limited yard access.

What are Illinois’ pool fence requirements?

Illinois pool barrier and fencing requirements are set by local municipalities and counties, and vary by jurisdiction. Common baseline requirements include barriers of sufficient height to prevent unauthorized access, self-closing and self-latching gates, limited ground clearance, and openings that prevent a child from passing through. Some jurisdictions impose stricter standards. Chicago, for example, requires barriers at least 5 feet high with self-closing, self-latching gates. Homeowners should verify current requirements with their local municipality and county building department before installation.

The 2026 Thursday Pools survey of Illinois independent dealers shows an average cost of $10,913 for a 300-linear-foot basic fence, with final costs varying by material, height, gate requirements, terrain, and local code compliance.

How much do common pool upgrades add to the cost in Illinois?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $6,047.
• An automatic pool cover averages $15,760.
• A paver patio of approximately 1,200 square feet averages $14,860.
• An add-on spa averages $22,520.
• Smaller additions like deck jets ($2,667 per jet), bubblers ($4,680 per bubbler), and LED lights ($2,549 per light) add cost in more manageable increments.

How do I get an accurate cost estimate for a fiberglass pool in Illinois?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get Your Personalized Illinois Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Illinois, and the design details and upgrades you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote, whether you’re in Chicago, Springfield, Rockford, Peoria, or anywhere across the state.

 

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Arkansas averages $50,000 for a small pool, $70,000 for a medium pool, and $88,333 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Arkansas’ hot, humid summers and occasional winter cold snaps make durability a key consideration when choosing an inground pool. Fiberglass is well-suited to the Natural State’s climate with a smooth, non-porous surface that resists algae growth, and fiberglass flexes rather than cracks through seasonal temperature shifts. Beyond climate, local geography also shapes installation costs. In areas like Little Rock and Fayetteville, rocky or clay-heavy soil can require extra excavation preparation. Rural properties with expansive yards typically offer more flexibility in pool size and layout, while tighter suburban lots may introduce access constraints.

Optional features like pool heaters for extending the swim season, automatic covers for easy maintenance, and landscaping to complement the surroundings all add to the total investment. A local independent Thursday Pools dealer can help you decide which additions fit your property and your budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Arkansas?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs

Based on the 2026 survey of independent Thursday Pools dealers in Arkansas, installed fiberglass pool costs average $50,000 for small pools, $70,000 for medium pools, and $88,333 for large pools.

AVERAGE ARKANSAS FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$50,000	$70,000	$83,333

 

What Does a Standard Fiberglass Pool Installation in Arkansas Include?

Most Arkansas fiberglass pool dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Arkansas pool installation.

 

What Do Popular Fiberglass Pool Models Cost Installed in Arkansas?

GOLIATH (12’ x 25’)

Goliath is a versatile choice for Arkansas homeowners looking for a compact yet capable fiberglass pool that fits well in suburban backyards across the state. At 25 feet in length, this model packs built-in entry steps and wraparound bench seating around an open swim lane without demanding a sprawling yard. It adapts equally well to tighter metro lots in Little Rock or Fayetteville and rural properties with room to spare.

Based on 2026 feedback from Thursday Pools dealers throughout Arkansas, the average installed cost for a small fiberglass pool like Goliath or other designs less than 26 feet long and 400 square feet is $50,000.

 

TITUS (14’ x 33’)

Titus brings graceful curves and mellow lines to mid-size backyards across Arkansas. Wide entry steps with built-in seating on one end and a full-length conversation bench at the other create a natural gathering place, while a generous open swim lane provides room for laps, games, and family use. The design fits comfortably in most suburban lots while still delivering a full pool experience.

According to 2026 survey responses from independent Thursday Pools dealers in Arkansas, the average installed cost for a medium-sized fiberglass pool like Titus is $70,000.

 

MACK DADDY (16’ x 36’)

Mack Daddy is built for Arkansas homeowners who want the full package. Thursday Pools’ first design to feature a fully integrated spa with a spillway, Mack Daddy also includes a spacious tanning ledge, a conversation area with wraparound benches and wide entry steps, and an open swim lane at uniform flat-bottom depth.

Larger Arkansas properties, whether in the spacious suburbs of Bentonville or the rural terrain of the Ozarks, have room to accommodate a pool of this scale. The average cost for a standard installation of a large fiberglass pool like Mack Daddy in Arkansas is $88,333.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Arkansas?

Arkansas’ diverse landscape means soil conditions and site challenges can vary from one backyard location to the next. Before breaking ground, a professional installer will assess your site for conditions that may require extra preparation.

Soil Type

Arkansas’ geology can create distinct soil challenges across the state. Rocky soil, common in the Ozarks and throughout Central and Northern Arkansas, often requires specialized excavation equipment and additional labor. Clay-heavy soils, found across much of the state’s central regions, can create drainage concerns and require special handling during installation. Sandy soils in Southern Arkansas may need additional stabilization to prevent pool shifting over time. A pre-installation site assessment will identify what your specific soil requires before the project begins.

Slope and Grade

Properties in hilly terrain, particularly in the Ozark and Ouachita regions, may need grading, retaining walls, or other leveling work before excavation can proceed. A relatively flat, level yard keeps installation more straightforward and predictable.

Backyard Access

Wide-open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or other access constraints may need specialty equipment, additional labor, or crane service to move the one-piece pool shell into position. Established neighborhoods in Little Rock, Fayetteville, Jonesboro, and other urban areas are more likely to present access limitations that can affect both timeline and cost.

 

AVERAGE ADDITIONAL YARD-RELATED EXPENSES IN ARKANSAS
Excavating Sandy Soil	$567
Excavating Clay-Heavy Soil	$567
Excavating Rocky Soil	$3,567
Above-Average Slope Requiring Extra Grading	$5,633
Limited Access Yards	$7,100

Based on Thursday Pools’ 2026 independent dealer survey, site-condition upcharges range from about $567 for excavating sandy or clay-heavy soil to $7,100 for navigating limited yard access.

 

What Are Arkansas’ Swimming Pool Fence Requirements?

The Arkansas Department of Health (ADH) does not regulate single-family residential pools from a single statewide level, although the state does direct homeowners to the U.S. Consumer Product Safety Commission’s Safety Barrier Guidelines for Residential Pools.

Arkansas municipalities largely default to the International Residential Code’s Appendix G for residential pool barriers, which includes pool barrier requirements such as:

• The barrier must be at least 48 inches tall, measured on the exterior side of the fence or wall facing away from the pool.
• The maximum vertical clearance between the ground and the bottom of the barrier must not exceed 2 inches.
• Openings in the barrier must not allow passage of a 4-inch-diameter sphere.
• Gates must be self-closing and self-latching, and must open outward away from the pool.
• Where the self-latching mechanism is located less than 54 inches above the ground, it must be positioned on the pool side of the gate.
• Barriers must not contain footholds, handholds, or other features that would allow a child to climb over.

Local jurisdictions may adopt stricter standards or additional requirements beyond these baseline specifications. Always verify requirements with your local municipality, county building department, and HOA before installation. Local building officials can provide current permit requirements and any amendments your jurisdiction has made to the IRC baseline.

For a 300-linear-foot basic pool fence, Arkansas dealers estimate an average cost of $4,500. Final pricing varies by material, height, gate requirements, terrain, and local code compliance.

 

How Much Do Fiberglass Pool Upgrades Cost in Arkansas?

Optional features can expand what your pool does and extend your swimming season throughout Arkansas’ climate. The right upgrades enhance comfort, convenience, and safety while maximizing your investment. The averages below come from Thursday Pools’ 2026 dealer survey in Arkansas.

Water Quality and System Controls

Pool Heater

• Average Cost in Arkansas: $5,700
• Extend your swim season by keeping the water at a comfortable temperature during cooler months, maximizing your investment through Arkansas’ mild winters and shoulder seasons.

UV Filter System

• Average Cost in Arkansas: $2,167
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System

• Average Cost in Arkansas: $2,933
• Manage temperature, lighting, and filtration from a smartphone or tablet.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Arkansas: $14,567
• A durable, low-maintenance decking option that handles Arkansas’ seasonal temperature variation.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Arkansas: $20,000
• Available in a range of materials, from concrete pavers to natural stone, with a more finished aesthetic than poured concrete. Brick and concrete pavers perform best through Arkansas’ freeze-thaw cycles.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Arkansas: $4,500
• Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Arkansas: $2,267
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover

• Average Cost in Arkansas: $19,200
• One-touch operation to protect the pool, retain heat, and reduce evaporation.

 

Water Features

Deck Jets

• Average Cost in Arkansas: $600 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Arkansas: $1,633 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Arkansas: $8,500
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Arkansas: $2,967
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Arkansas: $831 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Arkansas: $2,500
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Recreation

Simple Pool Slide*

• Average Cost in Arkansas: $5,000
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Arkansas: $8,133
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Arkansas: $1,800
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Arkansas: $5,833
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Arkansas: $27,067
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

 

Frequently Asked Questions About Arkansas Fiberglass Pool Costs

How much does a fiberglass pool cost in Arkansas?

A fiberglass pool in Arkansas costs an average of $50,000 for a small pool, $70,000 for a medium pool, and $88,333 for a large pool, based on Thursday Pools’ 2026 survey of the state’s independent dealers.

What does a standard fiberglass pool installation in Arkansas include?

A standard fiberglass pool installation in Arkansas typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Arkansas?

Rocky soil in the Ozarks and central Arkansas requires specialized excavation equipment and additional labor. Clay-heavy and sandy soils, while less costly to excavate, can each require extra handling to ensure stable installation. Sloped yards, common throughout Arkansas’ hillier regions, often need grading work to create a level base. Limited backyard access, such as narrow gates or tight side yards, can require crane service or specialty equipment. Based on Thursday Pools’ 2026 Arkansas dealer survey, site-condition upcharges range from about $567 for working with sandy or clay-heavy soil to $7,100 for navigating limited yard access.

What are Arkansas’ pool fence requirements?

Most Arkansas municipalities adopt the International Residential Code, which requires barriers at least 48 inches tall, a maximum 2-inch ground clearance, openings no larger than 4 inches, and self-closing, self-latching gates that open away from the pool. Local jurisdictions may apply stricter standards. Homeowners should verify current requirements with their municipality and county building department before installation.

The 2026 Thursday Pools survey of Arkansas independent dealers shows an average cost of $4,500 for a 300-linear-foot basic fence, with final costs varying by material, height, gate requirements, terrain, and local code compliance.

How much do common pool upgrades add to the cost in Arkansas?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $5,700.
• An automatic pool cover averages $19,200.
• A paver patio of approximately 1,200 square feet averages $20,000.
• An add-on spa averages $27,067.
• Smaller additions like deck jets ($600 per jet), bubblers ($1,633 per bubbler), and LED lights ($831 per light) add cost in more manageable increments.

How do I get an accurate cost estimate for a fiberglass pool in Arkansas?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get Your Personalized Arkansas Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Arkansas, and the design details and upgrades you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote, whether you’re in Little Rock, Fayetteville, Hot Springs, Jonesboro, Bentonville, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Ohio averages $76,136 for a small pool, $91,818 for a medium-sized pool, and $109,545 for a large pool. Final costs depend on pool size, yard conditions, permit requirements, and selected upgrades.

Ohio’s geography creates real variation in pool installation costs from one part of the state to another. In Columbus, Cincinnati, and Cleveland, permit and zoning requirements can increase costs. Rocky terrain in Eastern and Southeastern Ohio often requires more excavation and labor. Flatter, more accessible sites in Central and Western Ohio, including areas near Dayton and Toledo, typically keep costs lower. Soil conditions, from clay-heavy to rocky, also directly impact excavation and site preparation expenses.

Optional upgrades like pool heaters, automatic covers, and custom patios increase your total cost but also enhance pool usability and value. A local independent Thursday Pools dealer can help you select additions that suit your yard and budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Ohio?

By conducting a 2025 survey of our independent dealers across Ohio, Thursday Pools gathered valuable data to provide an overview of the average cost of installing a fiberglass pool in the state. If you’re just beginning to explore fiberglass pool costs in your area, you’re in the right place to start your research.

 

AVERAGE OHIO FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$76,136	$91,818	$109,545

 

What Counts as a Standard Pool Installation?

Most Ohio dealers include the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, one pool light, initial water fill, dirt hauling, about 3 feet of concrete decking around the pool, delivery, and labor in their base package. Dealer offerings may vary, so compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and other optional features usually cost extra.

Contact a local Thursday Pools dealer for a custom quote and information on financing options for your Ohio pool installation.

What Do Popular Fiberglass Pool Models Cost Installed in Ohio?

PEARL (15’ x 25’)

Pearl is a unique, scallop-shaped pool with wraparound bench seating along its interior perimeter and centrally located entry steps that keep the layout open and accessible. Its compact footprint fits well in typical Ohio suburban backyards, including tighter lots in Columbus, Cincinnati, and Cleveland neighborhoods.

Based on 2026 feedback from Thursday Pools dealers across Ohio, the average installed cost for a small fiberglass pool like Pearl or other designs less than 26 feet long and 400 square feet is $76,136.

 

ASPEN (14’ x 30’)

Aspen offers a balance of size and built-in functionality that works well for Ohio homeowners looking for a mid-size pool. Wide entry steps, bench seating, and a tanning ledge give the pool multiple use zones within a rectangular footprint that fits most suburban yards.

According to 2026 survey responses from independent Thursday Pools dealers in Ohio, the average installed cost for a medium fiberglass pool like the 14′ x 30′ Aspen is $91,818.

 

GOLIATH (16’ x 41’)

Goliath suits large Ohio backyards that can accommodate a full-length pool design. Dual-corner entry steps lead into a wide, open swim lane. Built-in bench seating at the entry and swim-out benches in the deep end give swimmers places to rest and gather without taking space from the main swimming area.

Due to its size, at 41 feet long and more than 600 square feet, larger pools like the Goliath typically come at a higher installed cost. In Ohio, the 2026 average installed cost for a large fiberglass pool is $109,545.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Ohio?

Ohio’s diverse soil types and terrain can significantly impact installation costs. Before starting, a professional installer will assess your site for any conditions that may require additional preparation.

Soil Type

Ohio soil ranges from clay-heavy ground across much of the state’s suburban and central areas to rocky conditions in the Appalachian foothills of Southeastern Ohio. Clay-filled soil can create drainage and stability concerns. Rocky soil requires heavier excavation equipment and more labor. Sandy soil, found in areas near Lake Erie, may need additional stabilization to properly support the pool shell. A pre-installation site assessment can identify what your soil requires before the project begins.

Slope and Grade

Yards with a slope often require grading, retaining walls, or other leveling work before excavation and installation can move forward. That site prep adds time and cost. Homes in hillier parts of Ohio, particularly in the Appalachian Plateau or along the Ohio River valley, are more likely to encounter this. A flat, level yard typically keeps installation more straightforward and predictable.

Backyard Access

Easy and open access make a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or other access constraints may need specialty equipment, additional labor, or crane service to move the pool shell into position. Access limits can affect the timeline and cost of even a straightforward pool design.

 

Yard Condition	Average Additional Cost in Ohio
Excavating Rocky Soil	$1,985
Excavating Sandy Soil	$2,135
Excavating Clay-Heavy Soil	$1,155
Above-Average Slope Requiring Extra Grading	$2,735
Limited Yard Access	$3,465

 

According to the 2026 Ohio dealer survey, site-condition upcharges range from about $1,155 for clay-heavy soil excavation to $3,465 for limited yard access.

What Are Ohio’s Swimming Pool Fence Requirements?

The Ohio Administrative Code requires residential pool barriers to meet specific safety standards to protect users, especially children. Key requirements include:

• The barrier must be at least 48 inches tall and form a continuous enclosure around the pool.
• The bottom of the barrier must sit no more than 2 inches above the ground.
• Gates and doors must be self-closing and self-latching.
• Latches positioned less than 54 inches above the ground must be located on the pool-facing side of the gate.

Always review swimming pool barrier and safety regulations for your county or municipality before installation. Local authorities may enforce additional requirements beyond state standards.

Ohio dealers estimate an average cost of $6,547 for a basic 300-linear-foot pool fence. Final pricing varies by material, height, gate requirements, terrain, and local code.

 

How Much Do Fiberglass Pool Upgrades Cost in Ohio?

Optional features can extend your pool’s functionality and seasonal use. The following averages are from Thursday Pools’ 2026 dealer survey of independent Ohio installers.

Water Quality and System Controls

Pool Heater 

• Average Cost in Ohio: $4,288 
• Extend your swim season by maintaining comfortable water temperatures into the cooler fall months.

UV Filter System 

• Average Cost in Ohio: $2,529 
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System 

• Average Cost in Ohio: $4,794 
• Control temperature, lighting, and filtration from your smartphone or tablet.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.) 

• Average Cost in Ohio: $12,018 
• A durable, low-maintenance decking option that holds up well through Ohio’s temperature extremes and freeze-thaw cycles.

Paver Patio (Approx. 1,200 sq. ft.) 

• Average Cost in Ohio: $11,600 
• Available in materials ranging from concrete to natural stone, paver patios offer a more custom look than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.) 

• Average Cost in Ohio: $6,547 
• Required by the Ohio Administrative Code, final fencing costs vary by material, total length, and local code requirements.

Non-Automatic Safety Pool Cover 

• Average Cost in Ohio: $4,635 
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover 

• Average Cost in Ohio: $17,888 
• Automatic covers offer one-touch operation to protect the pool, retain heat, and reduce evaporation. Many Ohio homeowners prioritize this upgrade for safety and convenience.

 

Water Features

Deck Jets 

• Average Cost in Ohio: $1,518 per jet 
• Deck jets arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers 

• Average Cost in Ohio: $2,288 per bubbler 
• Bubblers on a tanning ledge or beach entry create movement and the sound of a babbling brook in shallow pool water.

Cascade or Waterfall 

• Average Cost in Ohio: $4,647 
• Cascades or waterfalls add flowing water and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System 

• Average Cost in Ohio: $1,953 
• Automatic cleaning systems keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights 

• Average Cost in Ohio: $1,770 per light 
• LED pool lights add ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile 

• Average Cost in Ohio: $3,971 
• Specialty waterline tile is installed along the pool edge for a custom, finished appearance.

 

Recreation

Simple Pool Slide* 

• Average Cost in Ohio: $4,735 
• A simple pool slide provides all-ages family fun.

Deluxe Pool Slide* 

• Average Cost in Ohio: $9,482 
• A deluxe pool slide offers more height and design features than a basic model.

Diving Board (Type 1 Diving Pools Only)* 

• Average Cost in Ohio: $5,594 
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with designated pool models and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Landscaping and Extras

Surrounding Landscaping 

• Average Cost in Ohio: $4,541 
• Landscaping includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa 

• Average Cost in Ohio: $23,747 
• An add-on spa provides relaxing hydrotherapy and can be installed adjacent to or separate from the main pool.

 

Frequently Asked Questions About Ohio Fiberglass Pool Costs

How much does a fiberglass pool cost in Ohio?

A fiberglass pool in Ohio costs an average of $76,136 for a small pool, $91,818 for a medium pool, and $109,545 for a large pool, based on Thursday Pools’ 2026 dealer survey of 25 Ohio installers.

What does a standard fiberglass pool installation in Ohio include?

Our 2026 Ohio dealer survey shows that a standard fiberglass pool installation typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local Ohio municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Ohio?

Rocky, sandy, or clay-heavy soil can each require additional excavation work or site stabilization before the pool shell goes in. Sloped yards, common in eastern Ohio’s Appalachian foothills and along the Ohio River, often need grading work to create a level base. Limited backyard access, such as narrow gates or tight side yards, can require crane service or specialized equipment. Based on Thursday Pools’ 2026 Ohio dealer survey, site-condition upcharges range from about $1,155 for clay-heavy soil excavation to $3,465 for navigating limited yard access.

What are Ohio’s pool fence requirements?

Ohio requires pool barriers to be at least 48 inches tall and form a continuous enclosure, with self-closing, self-latching gates. The bottom of the barrier must be no more than 2 inches above the ground. Latches less than 54 inches above the ground must be on the pool-facing side of the gate. Local county and municipality rules may exceed the state minimum, so always verify requirements before installation. The 2026 Ohio Thursday Pools dealer survey average for a 300-linear-foot basic fence is $6,547, with final costs varying by material, height, terrain, and local code.

How much do common pool upgrades add to the cost in Ohio?

Upgrade costs vary widely depending on the feature. A pool heater averages $4,288. An automatic pool cover averages $17,888. A paver patio of approximately 1,200 square feet averages $11,600. An add-on spa averages $23,747. Smaller additions like deck jets ($1,518 per jet), bubblers ($2,288 per bubbler), and LED lights ($1,770 per light) add cost in more modest increments.

How do I get an accurate cost estimate for a fiberglass pool in Ohio?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

 

Get Your Personalized Ohio Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Ohio, and the design details and extra features you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote whether you’re in Columbus, Cincinnati, Cleveland, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.

Based on a 2026 survey of independent fiberglass pool builders in the Thursday Pools dealer network, a standard fiberglass pool installation in Indiana averages $68,333 for a small pool, $86,905 for a medium pool, and $98,333 for a large pool. Your final cost will depend on details like pool size, yard conditions, local permit requirements, and the optional upgrades you choose.

Indiana’s geography creates real variation in pool installation costs from one part of the state to another. In metro areas like Indianapolis and Fort Wayne, local permit requirements and zoning regulations can add to the project cost. In more rural parts of Southern Indiana or up near Lake Michigan, more open sites and fewer regulatory layers can simplify the process and keep costs more predictable. Soil conditions vary across the state as well, from clay-heavy ground in Central Indiana to sandier soils in some northern areas, and those differences can affect excavation complexity and site-prep costs directly.

Optional upgrades such as pool heaters, automatic covers, and custom patio surfaces add to your total, but they also determine how much use and year-round value you get from the pool. A local independent Thursday Pools dealer can help you decide which additions fit your yard and your budget.

 

What is the Average Cost of a Fiberglass Pool Installation in Indiana?

Thursday Pools surveys its network of independent dealers across the country each year to track real-world installation costs. The figures below come from the responses of 23 dealers operating throughout the state.

Based on the 2026 survey of independent Thursday Pools dealers in Indiana, installed fiberglass pool costs average $68,333 for small pools, $86,905 for medium pools, and $98,333 for large pools.

 

AVERAGE INDIANA FIBERGLASS POOL INSTALLATION BY SIZE
Pool Type	Small Fiberglass Pools	Medium Fiberglass Pools	Large Fiberglass Pools
Size Range	Up to 26 feet long or 400 square feet	26 to 34 feet long or 400 to 600 square feet	35 feet and longer or 600+ square feet
Average Cost	$68,333	$86,905	$98,333

 

What Counts as a Standard Pool Installation?

Most Indiana dealers include the following in a base package: the pool shell, excavation, basic pump and filtration equipment, plumbing, basic electrical, permits, a single pool light, initial water fill, dirt hauling, concrete decking approximately 3 feet around the pool, delivery, and labor. What individual dealers include can vary, so always compare proposals carefully. Expanded decking, fencing, landscaping, pool covers, and optional features typically cost extra.

Contact a nearby Thursday Pools dealer for a custom quote and to learn about financing options for your Indiana pool installation.

 

What Do Popular Fiberglass Pool Models Cost Installed in Indiana?

ASPEN (12’ x 25’)

Aspen is available in five sizes, with the smallest option well-suited to compact backyards in Indiana’s urban and suburban neighborhoods. Its interior includes room for swimming and a built-in tanning ledge platform for lounging or keeping an eye on younger swimmers in the water.

Based on 2026 feedback from Thursday Pools dealers across Indiana, the average installed cost for a small fiberglass pool like Aspen or other designs less than 26 feet long and 400 square feet is $68,333.

 

SUN DAY (15’ x 30’)

Sun Day combines a freeform design with a functional interior layout, making it a strong fit for mid-size to larger yards throughout Indiana. Available in three sizes, the compact Sun Day works well in most suburban backyards while leaving room for patio space and additional landscaping. Interior highlights include a large landing pad, built-in entry stairs, wraparound benches, a deep-end courtesy ledge, and a separate swim-out sun shelf.

According to 2026 survey responses from independent Thursday Pools dealers in Indiana, the average installed cost for a medium-sized fiberglass pool like the 15′ x 30′ Sun Day is $86,905.

 

MACK DADDY (16’ x 36’)

Mack Daddy suits large backyards that can accommodate a full-featured pool design. It includes an integrated spa with a spillway, a spacious tanning ledge, wraparound benches, wide entry steps, and a large open swim lane with a consistent flat-bottom depth practical for both lap swimming and general use.

Due to its size, at 36 feet long and more than 600 square feet, larger pools like the Mack Daddy typically come at a higher installed cost. In Indiana, the 2026 average installed cost for a large fiberglass pool is $98,333.

 

What Yard Conditions Affect Fiberglass Pool Installation Costs in Indiana?

Indiana’s varied soil types and terrain can affect installation costs significantly, sometimes more than homeowners expect. Before breaking ground, a professional installer assesses your site for conditions that may require extra preparation.

Soil Type

Indiana soil ranges from clay-heavy ground across much of Central and Southern Indiana to sandier conditions in some northern areas near Lake Michigan. Clay soil can create drainage and stability concerns. Rocky soil requires heavier excavation equipment and more labor. Sandy soil may need additional stabilization to properly support the pool shell. A pre-installation site assessment can identify what your soil requires before the project begins.

Slope and Grade

Yards with a slope often require grading, retaining walls, or other leveling work before excavation and installation can move forward. That site prep adds time and cost. A flat, level yard typically keeps installation more straightforward and predictable.

Backyard Access

Wide, open access makes a fiberglass pool installation more efficient. Properties with narrow gates, tight side yards, or other access constraints may need specialty equipment, additional labor, or crane service to move the pool shell into position. Access limits can affect the timeline and cost of even a straightforward pool design.

 

Yard Condition	Average Additional Cost in Indiana
Excavating Rocky Soil	$2,268
Excavating Sandy Soil	$1,868
Excavating Clay-Heavy Soil	$1,047
Above-Average Slope Requiring Extra Grading	$3,174
Limited Yard Access	$2,363

 

Based on the 2026 Indiana dealer survey, site-condition upcharges range from about $1,047 for clay soil excavation to $3,174 for above-average slope grading.

 

What Are Indiana’s Swimming Pool Fence Requirements?

The Indiana Department of Health requires swimming pool fences to meet specific safety standards to protect users, especially children. Key requirements include:

• The fence must stand at least 4 feet tall and form a continuous barrier around the pool.
• Gates must be self-closing and self-latching, with the latch positioned at least 54 inches above the ground.
• No gap between fence slats can exceed 4 inches.
• Fence materials must be durable and sturdy enough to resist being knocked over or climbed.

Always check swimming pool fencing and safety regulations for your local county or municipality before installation. Many areas have requirements that go beyond the state baseline and are updated regularly.

For a 300-linear-foot basic pool fence, Indiana dealers estimate an average cost of $5,075. Final pricing varies by material, height, gate requirements, terrain, and local code.

How Much Do Fiberglass Pool Upgrades Cost in Indiana?

Optional features can expand what your pool does and how long you use it each season. The averages below come from Thursday Pools’ 2026 dealer survey of independent installers across Indiana.

 

Water Quality & System Controls

Pool Heater

• Average Cost in Indiana: $4,700
• Extend your swim season by keeping the water at a comfortable temperature into cooler fall months.

UV Filter System

• Average Cost in Indiana: $1,994
• A UV system passes pool water through an ultraviolet light chamber that destroys bacteria, algae, and chloramines so chlorine works more efficiently and you need less of it to maintain safe, sanitary water.

Pool Automation and Smart Control System

• Average Cost in Indiana: $4,950
• Manage temperature, lighting, and filtration from a smartphone or tablet.

 

Patio and Hardscape

Poured Concrete Patio (Approx. 1,200 sq. ft.)

• Average Cost in Indiana: $9,912
• A durable, low-maintenance decking option holds up well through Indiana’s freeze-thaw cycles.

Paver Patio (Approx. 1,200 sq. ft.)

• Average Cost in Indiana: $11,888 average
• Available in a range of materials, from concrete pavers to natural stone, with a more finished aesthetic than poured concrete.

 

Safety and Covers

Fence (300 Linear ft.)

• Average Cost in Indiana: $5,075
• Required by the Indiana Department of Health. Final cost varies by material choices, total fence length, and local code requirements.

Non-Automatic Safety Pool Cover

• Average Cost in Indiana: $3,944
• A manual option for securing the pool and keeping debris out between uses.

Automatic Pool Cover

• Average Cost in Indiana: $14,806
• Enjoy one-touch operation to protect the pool, retain heat, and reduce evaporation. Many Indiana homeowners prioritize this upgrade for safety and convenience.

 

Water Features

Deck Jets

• Average Cost in Indiana: $794 per jet
• Arc water from the coping into the pool, adding visual movement and ambient sound to the pool area.

Bubblers

• Average Cost in Indiana: $1,438 per bubbler
• On a tanning ledge or beach entry, create movement and the sounds of a babbling brook in shallow pool water.

Cascade or Waterfall

• Average Cost in Indiana: $3,400
• Add a flowing water element and natural sound to the pool environment.

 

Cleaning and Maintenance

Automatic Pool Cleaning and Vacuuming System

• Average Cost in Indiana: $2,044
• Keep the pool floor and walls clean with minimal manual effort.

 

Lighting and Tile

LED Pool Lights

• Average Cost in Indiana: $1,152 per light
• Adds ambiance and visibility for evening and nighttime use.

Specialty Waterline Tile

• Average Cost in Indiana: $3,831
• Installed along the waterline for a custom, finished appearance at the pool edge.

 

Recreation

Simple Pool Slide*

• Average Cost in Indiana: $4,231
• A standard slide for family use.

Deluxe Pool Slide*

• Average Cost in Indiana: $6,869
• More height and design details than a basic model.

Diving Board (Type 1 Diving Pools Only)*

• Average Cost in Indiana: $2,450
• Only manufacturer-designated Type 1 diving pools support diving board installation. Homeowners should use only manufacturer-approved diving boards with pool models designated as diving pools and must consult a licensed professional to verify compliance with all local building codes and safety requirements before installation.

*Thursday Pools strongly advises against pool slides and diving boards due to safety concerns. The inclusion of a diving board or slide with any fiberglass pool must be carefully reviewed by a licensed professional to ensure compliance with all local building codes, safety regulations, and manufacturer guidelines. Not all fiberglass pool models are suitable for diving or slide use. It is the responsibility of the homeowner and installer to ensure proper installation and usage. Always prioritize safety and consult a qualified expert before adding any diving or sliding feature to your pool.

 

Landscaping and Extras

Surrounding Landscaping

• Average Cost in Indiana: $4,212
• Includes decorative rocks, plantings, trees, bushes, flower beds, and similar elements that connect the pool to the rest of the yard.

Add-On Spa

• Average Cost in Indiana: $16,481
• A separate spa unit for relaxing hydrotherapy, neighboring or independent of the main pool.

Frequently Asked Questions About Indiana Fiberglass Pool Costs

How much does a fiberglass pool cost in Indiana?

A fiberglass pool in Indiana costs an average of $68,333 for a small pool, $86,905 for a medium pool, and $98,333 for a large pool, based on Thursday Pools’ 2026 dealer survey of 23 Indiana installers. 

What does a standard fiberglass pool installation in Indiana include?

Our 2026 Indiana dealer survey shows that a standard fiberglass pool installation typically includes:

• Excavation and Dirt Hauling: Soil removal and site preparation.
• Pool Shell and Delivery: The physical fiberglass pool shell unit delivered to your home.
• Filtration System: Basic pump, filter, and plumbing.
• Standard Decking: Approximately 3 feet of concrete surrounding the pool.
• Permits and Basic Electrical: Includes local Indiana municipal filings and one LED pool light.

What yard conditions raise fiberglass pool installation costs in Indiana?

Rocky, sandy, or clay-heavy soil can each require additional excavation work or site stabilization before the pool shell goes in. Sloped yards often need grading work to create a level base. Limited backyard access, such as narrow gates or tight side yards, can require crane service or specialized equipment. Based on the 2026 Indiana dealer survey, site-condition upcharges range from about $1,047 for clay soil excavation to $3,174 for above-average slope grading.

What are Indiana’s pool fence requirements?

Indiana requires pool fences to be at least 4 feet tall and form a continuous barrier, with self-closing, self-latching gates and no gaps larger than 4 inches between slats. Gate latches must be at least 54 inches above the ground. Local county and municipality rules may exceed the state minimum, so always verify requirements before installation. The 2026 Indiana Thursday Pools dealer survey average for a 300-linear-foot basic fence is $5,075, with final costs varying by material, height, terrain, and local code.

How much do common pool upgrades add to the cost in Indiana?

Upgrade costs vary widely depending on the feature:

• A pool heater averages $4,700.
• An automatic pool cover averages $14,806.
• A paver patio of approximately 1,200 square feet averages $11,888.
• An add-on spa averages $16,481.
• Smaller additions like deck jets ($794 per jet), bubblers ($1,438 per bubbler), and LED lights ($1,152 per light) add cost in more modest increments. 

How do I get an accurate cost estimate for a fiberglass pool in Indiana?

The most accurate estimate comes from a local independent Thursday Pools dealer who can assess your yard, review local permit requirements, and give you a project-specific quote. Survey averages provide a useful starting point, but site conditions, design choices, and local labor rates determine what you actually pay.

Get Your Personalized Indiana Pool Estimate

Survey averages give you a realistic starting point, but your actual cost depends on your yard, your location in Indiana, and the design details and extra features you choose. A local independent Thursday Pools dealer can assess your site, walk you through pool options that fit your budget, and give you a project-specific quote—whether you’re in Indianapolis, Fort Wayne, or anywhere across the state.

Thursday Pools manufactures fiberglass pool shells and does not install pools. Pools are installed by locally owned independent dealers. Consumers should consult a local independent dealer for the most accurate and updated information based on the unique conditions of their region and property.